15
How to put ARGUS into operation
Set the brightness threshold:
here (Figure
;A
) you can infinitely adjust the ambient brightness level
at which movements should be detected and a switching procedure
should be triggered.
1
Set the brightness threshold (Figure
:
):
– Right stop (sun symbol): Day and night operation (approve. 1000
luxury), all movements in the area of detection will be detected,
independent of the external brightness.
– Left stop (moon symbol): Night operation (polar white: approx. 3 lux,
dark brazil: approx. 5 lux), movements are only detected in the dark.
Setting the switching duration:
you can use this (Figure
_
) to set how long the loads connected to
ARGUS remain switched on for; there are six levels to choose from.
When ARGUS 360 detects a movement, the load is switched on and
stays switched on until the set period has elapsed. Every further
movement puts the switching duration back to the start.
|
Note:
ARGUS 360 ignores the light-sensitive switch after the load
has been switched on. If the movement detector does not switch
the load off again, the reason is probably that ARGUS has detected
further movements and has restarted the switching duration
several times.
1
Setting the switching duration:
– Left stop: Switching duration approx. 1 s
– Right stop: switching duration approx. 8 min
V5644-581-01.book Seite 15 Donnerstag, 24. November 2005 1:29 13
16
Technical data
½
Caution!
Operation only possible with sinusoidal mains voltages.
Phase control dimmers or inverters with square-wave or trapezoidal
voltage curves will damage the device.
Technical data
Mains voltage:
AC 230 V ±10%, 50 Hz.
Max. switching current:
16 A, AC 230 V, cos
ϑο
= 0.6
Nominal output
Incandescent lamps
AC 230 V:
max. 3000 W
Halogen lamps AC 230 V:
max. 2500 W
Capacitive load:
max. 140
µ
F
Power consumption:
< 1 W
Angle of detection:
360°
Mounting height:
min. 1.7 m, recommended 2.5 m
Range:
depth 16 m to the front + 14 m to the rear
breadth 20 m
Number of levels:
7
Number of zones:
124 with 496 switching segments
Light sensor
infinitely adjustable
564419: approx. 3–1000 lux,
564415: approx. 5–1000 lux
Switching duration
adjustable in 6 levels of approx. 1 s - 8 min
Type of protection:
IP 55
Neutral conductor:
required
EC guidelines:
Low voltage guideline 73/23/EEC and EMC
guideline 89/336/EEC
V5644-581-01.book Seite 16 Donnerstag, 24. November 2005 1:29 13