10
POWER PADS
There are 4 Microwave Power Pads to select from: 25%,
50%, 75%, and 100%. A light will indicate the one in use.
CONVECTION PAD
This is used when foods only require browning( no micro-
wave)
Note: when cooking the MICROWAVE and CONVECTION
pads start the cycle and timer. You may alter power levels
during a manual cooking cycle. When cooking is
interrupted, a light will flash as a reminder that the time is
being held (see PAUSE).
TIME/PROGRAM SELECT PADS
These pads are used for setting the cooking time in 1
second steps to a maximum of 30 minutes. They are also
used for programmes from 01-10
TEMPERATURE SETTING PADS
These pads are used to set the convection temperature. A
light will indicate the temperature set. Selecting the ‘
0
’ key
will switch convection off. If a temperature key is pressed
and held the current oven temperature will be displayed in
the time display window.
CANCEL/ CALLBACK ‘C’ PAD
Cancels all timed cooking cycles, pre-programmed operations
and stop the microwave energy. It does not alter the oven
temperature . If the oven is hot food will continue to cook and
should be removed from the oven immediately. This pad will
also cancel any incorrect operations. It will not erase pro-
grams. It can also be used to view the details of stored pro-
grams.
(see CALL BACK)
PROGRAM ‘P’ PAD
Activate or set program
TIME AND PROGRAM DISPLAY
Shows the time set in minutes and seconds and counts down
in 1 second steps during a cooking
cycle.
Also displays error messages and oven temperature.
(PROBLEM SOLVING )
The program display indicates the program number
selected. ‘PP’ indicates programming
MULTI-STAGE INDICATOR
Indicates stage in multi-stage cooking
COLON
When programming the colon will flash to indicate the time
may now be entered.
ON/OFF SWITCH
ERROR DISPLAY
See PROBLEM SOLVING Section 8.
CONTROL PANEL
POWER PADS
CONVECTION PAD
TIME/PROGRAM SELECT PADS
PROGRAM PAD
CANCEL PAD
TEMPERATURE SETTING PADS
TIME/ERROR DISPLAY
MULTI-STAGE INDICATOR
COLON
TIME/ERROR DISPLAY
