Merrychef Mealstream 400 Series, Руководство по обслуживанию

Страница: 9 / 45

Page 9 Mealstream 401Ovens 32Z3311 Issue 9
a STEAM OUTLET
Allows steam and excess pressure to escape
from the oven cavity. It must be kept clear.
b AIR OUTLET
Warm air is vented here. It must be kept clear.
c TRAY HANDLE RESTS
There is one on each side of the oven for
convenient storage of the tray handle.
d BAFFLE PLATE
Forms the inside rear of the oven and covers the
hot air circulation fan. Removable for cleaning by
unscrewing the four wing nuts which hold it in
place. This must be cleaned on a regular basis,
and kept free of debris.
e RUNNERS
These mounted on each side of the oven cavity
to support the rectangular racks or oven trays,
and are for use in
Convection mode only .
f HOT AIR FAN
Situated behind the baffle plate, and circulates
the hot air through the baffle plate, over the
heating element, and around the edge of the
baffle plate back into the cavity.
g OVEN CAVITY
The oven cavity is mainly constructed form
vitreous enamelled steel panels. It must be kept
clean.
BAFFLE PLATE & CATALYTIC
CONVERTOR (EC403 model only)
Allows extraction free cooking. Should be removed
regularly for cleaning. ( Do not spray/put caustic
cleaner directly into the catalytic converter as this will
cause permanent damage )
h TURNTABLE TRAY
The vitreous enamelled turntable tray fits onto the
turntable disc in the bottom of the oven cavity,
and rotates during cooking to ensure an even
distribution of microwave energy.
i AIR INLETS
Additional air inlets are situated along the lower
edge of the left-hand side panel, and must not be
obstructed.
j RATING PLATE
The rating plate is situated on the rear of the
oven, and states the Model, Serial Number,
Electrical Ratings and Manufacturers Tel no.
k DOOR
The door consists of a thermally insulated inner
section, and an additional air gap provided by a
twin skinned door front to lower the surface
temperature.
l ON/OFF SWITCH
This is used to turn the oven On or Off.
IT DOES NOT ISOLATE INTERNAL WIRING
FROM THE ELECTRICAL SUPPLY .
m FEET
These feet are fitted to ensure adequate airflow
under the oven. They must not be removed.
n ELECTRICAL SUPPLY LEAD
p AIR FILTER
Main intake for cooling air for internal
components. Must be clear of obstructions.
q MenuKey
Main features
a
b
c
d
e
f
g
h
j
k
l
m
p
n
q
rear view of Oven
b