ASSEMBLY INSTRUCTIONS
Assembling the Wall Unit
PLEASE DO NOT ATTEMPT TO ASSEMBLE ON YOUR OWN.
Installation of this product requires a minimum of two people. We highly recommend that you have this product installed by
a professional contractor. Read instructions completely before beginning assembly. Improper installation voids equipment
warranty. Merrithew will not be responsible for any injury or damage resulting from improper installation.
w
Place all parts from the box in a cleared area and position
them on the floor in front of you.
w
Remove all packing material from your area and place
them back into the box.
w
Do not dispose of the packing materials until assembly
is completed.
w
To prevent unsafe or improper use, please read each
step carefully before beginning or consult our online assembly
video at
merrithew.com/eq-assembly
.
1.
Remove the 3⁄8"x 3⁄4" hex bolts [13] (plain) from the three-
way joint [14] on the horizontal frame [1].
2.
Place the open end of the 3-way joint [14] onto the vertical
frame [7]. Tighten both 3⁄8"x 3⁄4" hex bolts [13] fully to
complete the frame.
3.
Find support studs in wall (typically 16"/ 40.64 cm apart)
NOTE:
On a standard drywall surface, when only one
support stud can be found, affix the remaining hole of the
wall plate to the wall using butterfly toggle anchors, slotted
hex head wall anchors or other appropriate heavy-duty
drywall anchor fasteners.
4.
Place frame against wall, using a “square” or level to ensure
frame is at a 90° angle. To adjust, hold base plate [11] of
horizontal frame [1] against wall and move vertical frame [7].
5.
Mark holes on wall and floor to mount plates. Select
appropriate hardware and attach the frame to wall and floor.
6.
Attach all springs as pictured.
7.
Test the stability and solidness of the Wall Unit before using.
Wall Unit Owner’s Manual
4
Hardware Required
not included
Specific bolts and/or screws used in the installation of
this equipment depends on the type of surface it is
being affixed to, although it is always recommended
that you try to attach to a wall stud.
Your local hardware store or contractor will be able
to assist you in selecting the appropriate hardware for
your specific needs.
Affixing to Drywall
Butterfly toggle or slotted hex head wall anchors
Affixing to Brick Wall
Masonry fasteners
Affixing to Ceramic Tile Floor
Masonry fasteners
Affixing to Wood Floor/Carpeting
Wood screws
Required Tools
included
Universal Assembly Tool
not included
Builder’s Level
Electric Drill
Содержание Wall Unit
Страница 5: ...5 ...
