Merrithew Health & Fitness Cadillac, Руководство пользователя

Страница: 7 / 16

7
7. Line up pre-drilled holes on chrome uprights [26] with top
frame assembly [2]. Insert hex bolts into all four uprights and
tighten securely.
9. Move vertically sliding bar [21] to top of uprights. Tighten star
knobs [1] to hold bar in place.
11. Tighten one hex bolt [27] in place per upright on short side
of bed frame. Repeat at other end. Subtle adjustments may
be required.
13. REQUIRES TWO PEOPLE. Carefully place upholstered bed
[13] on top of bed frame [15] and ensure it sits fully supported on
all sides. This is easiest done by tilting bed on a diagonal angle
and sliding it through the chrome uprights.
14. Slide washer onto eyehooks and insert eyehooks [17] into
holes near bottom of chrome uprights [26] and below bed frame
on black uprights [11]. Place second washer on other side of
upright, thread on bolt and tighten securely. Ensure eyehooks are
facing outward and positioned vertically.
8. Screw star knobs [1] into vertically sliding bar [21], but do not
tighten completely.
10. REQUIRES TWO PEOPLE. One person lifts bed frame [15]
while standing in the center. At one end, second person ensures
height of frame is 22.75" (58cm) from top of frame to the floor.
12. Ensure vertically sliding bar [21] slides freely, push-thru bar [12]
rotates freely and bed frame [15] is level. Tighten all remaining
hex bolts [27] securely. Insert hex bolts into base plates [19]
and tighten all securely.