MERLYN MB11, Руководство по установке

Страница: 3 / 6

1.Position the wall profile so the seal on the
moving panel sits on the inside edge of the
bath.
FIG 1.
2. Plumb the wall profiles using the vertical element of
the spirit level. Mark 3 holes, drill with 6mm masonry
bit and fit wall plugs. Using the 3 screw fix wall profile
to wall.
FIG 2.
FIG 2
FIG 3
LH RH
3. Ensure rising butt ( FIG 3 /C) is to the bottom, if not reverse by loosening
screws as in A. Swing screen around and tighten screws as in FIG 3.
A
C E
B D F
FIG 1
screen
inside
bath edge