11
The electronic cooking programmer
This feature allows you to program the oven or the grill as
follows :
•
delayed start for a specific length of time;
•
immediate start for a specific length of time;
•
timer.
Button Functions:
: timer - hours and minutes;
: cooking time;
: end cooking time;
: set cooking time - backward;
: set cooking time - forward.
How to reset the digital clock.
After the appliance has been connected to the power supply,
or when the power has gone out, the clock display will
automatically reset to 0:00 and begin to blink.
•
Press the
and
buttons consecutively
and then
reset the time (within 4 seconds) using the
and
buttons.
The
button sets the time forward.
The
button sets the time backward.
Whenever the time must be reset, follow this same procedu-
re.
Manual Operation of the Oven
After resetting the time, the program automatically switches
to the manual mode.
Note: To reset the manual mode after each “automatic”
cooking, press the
and
buttons simultaneously.
Start delayed cooking with preset duration
The length of the cooking program as well as the time at
which the cooking program ends must be set. If we assume
that the time displayed on the timer is 10:00:
1. Turn the oven control knobs to the feature and tempera-
ture desired (e.g. conventional oven, 200°C);
2. Press the
button and then set the cooking time (within
four seconds) using the
and
buttons. Let us sup-
pose that we set the cooking time at 30 minutes. The
display will read as follows:
A
After the button has been released, the current time will
be displayed again after approximately 4 seconds, along
with the
symbol and the letter "A" (AUTO);
3. Press the
button and then use the
and
buttons to set the time for when the cooking program
should end. Let us suppose this time to be 1:00 p.m.
A
4. After the button has been released, the current time will
be displayed after approximately 4 seconds:
A
The letter "A" will light up reminding you that the length
and end cooking time were programmed in automatic
mode. At this point, the oven will turn on automatically at
12:30 and then turn off after 30 minutes. When the oven is
turned on, the
symbol will be displayed for the entire
cooking time. At any time during the cooking process, the
length of the cooking time can be displayed by pressing
the
button, and the end cooking time by pressing the
button.
After the cooking time has expired, the timer will ring
for several minutes; to turn it off, simply press any of
the buttons except the
and
buttons.
Immediate start with preset duration
By programming just the duration (points 1 and 2 of the
“Start delayed cooking with preset duration” section),
cooking will start up immediately.
To cancel a cooking schedule already programmed
Press the
and
buttons simultaneously.
Timer Feature
The timer feature allows you to enter a given amount of time
from which the timer begins to count down. This feature does
not turn the oven on or off; it merely sounds when the time
has expired.
When the
button has been pressed, the display will
read as follows:
Then use the
and
buttons to set the desired time.
After the button has been released, the timer will start to
count down and the current time will be displayed.
After the time has expired, an acoustical signal will be emitted,
which can be turned off by pressing any of the buttons (except
the
and
buttons) at this point the
symbol will
also turn off.
Correction/Cancellation of Data
•
The data entered can be changed at any time by pressing
the corresponding button and the
or
buttons.
•
When the data for the length of the cooking time is
cancelled, the data for the end cooking time are also
cancelled automatically, and vice versa.
•
If the oven has been programmed, it will not accept end
cooking times which are before the start of the cooking
process.
Содержание C 659 P X UK
Страница 1: ...5 ring cooker with new 7 cuochi oven Instructions for installation and use C 659 P X UK ...
Страница 15: ...15 ...
