METERING
R
®
www.merkur-germany.com
Meter & Key Function Introduction
METERING
R
®
Item
Sub-item
Parameter
Billing
& Max.Demand
(Meter)
Billing Data(Energy)
Billing date can be set: any day between 1st ~28th
Stores last 12 billing data.
Data recorded for billing are:
- Date and Time of current reset
- Import active energy (Total and in each tariff)
- Export active energy
- Credit balance
- Energy consumption monthly
- Credit consumption monthly (without service charge)
Daily Billing
Bill generated at 00:00 everyday
Stores last 35 days billing data.
Billing Parameters are:
- Import active energy
- Credit balance
- Credit consumption daily (without service charge)
Max.Demand
Block mode.
Demand interval: 1,15,30 or 60 min
(configurable,15min default) .
Demand measure content:
- Import active MD and duration
(Total and in each tariff)
Accumulated MD
When the current max. demand is being reset,
the data of current max. demand will add to the
accumulate demand.
Demand measure content:
- Import active accumulated maximum demand
(Total and in each tariff)
Billing / Max.Demand Reset
- Manual billing:
Press the Config button for over 5s.
- Programming billing:
Billing by PC software and reset max. demand.
- Automatic billing: bill generated automatically on
set date.
- Tariff change: bill generated automatically when the
tariff changes
Anti-Tamper & Event
(Meter)
Alarm & Event log
Recent 100 times event are recorded as follow:
- Terminal cover open event start
- Terminal cover open event end
- Big Magnetic Field influence start
- Big Magnetic Field influence end
- Meter cover open event start
- Meter cover open event end
- Power on
- Energy reverse of phase start
- Energy reverse of phase end
- Energy reverse of neutral start
- Energy reverse of neutral end
- Swell event
- Current unbalance start
- Current unbalance end
- Battery removed event
8