background image

METERING

R

®

    

www.merkur-germany.com

Measurement

METERING

R

®

Energy Measurement

1)  

Measurement mode:

 

- Active Energy (import) = |+A

L1

|+|+A

L2

|+ |+A

L3

|

 

- Active Energy (export) = |-A

L1

|+|-A

L2

|+ |-A

L3

|

2) 

Class index: active energy metering class 1.0; reactive: class 2.0

3) 

Measurement function for:

  

- Import active energy 

  

  (Total and in each tariff)

  

- Export active energy

Punishment measurement

When meter is affected by external 0.5T high-intensity magnetic field interference, the current working 
power will be calculated at rated voltage * 1.5 Imax 

Instantaneous Values

The instantaneous values are:
  

- Voltage

  

- Current

  

- Power factor

  

- Active power

  

- Frequency

Demand Measurement

The demand for the period is simply the accumulated energy divided by the fraction of an hour that the 
demand period is. When a demand period ends, the demand is compared with the channel’s active maxi-
mum demand (MD)register. If it is larger, the new maximum demand register and the time of maximum 
demand is updated to the current time. 

When the current max. demand is reset, the data of current max. demand will add to the accumulated 
demand.
1) 

MD measurement mode: 1,15,30 or 60 min(configurable)

2) 

Manually clearing MD 

  

- Manual billing: Pressing the Configuration button for over 5s. 

  

- Programming billing: Billing by PC software and reset max. demand. 

  

- Automatic Billing: Bill generated automatically on set billing date 

  

- Tariff change: Bill generated automatically when tariff changes.

3) 

Demand measurement content: Import active MD and duration (Total and in each tariff)

4) 

Accumulate maximum demand measure content: Import active accumulated maximum demand

   

(Total and in each tariff)

12

Содержание DTS353

































Отзывы: