Merivaara OPTIMA MINOR, Инструкция по эксплуатации и обслуживанию

Страница: 33 / 35

33
7.1 Metals and plastics
When disposing of a trolley or replacing any of its parts, check the recyclability of each item. A majority of the
metal used on the trolley is steel. The operating table also contains a number of zinc castings and brass
bushings. When recycling -plastic parts, determine the material type. When recycling plastic parts, take the
material into account. The table on page 6 Page7 lists part materials, which will provide assistance in
determining the correct recycling procedure. If a part material is missing from the table, contact your sales
representative. For more information on recycling, contact your local waste management facility or visit
related sites on the Internet.
Below are recycling symbols, which are marked on parts made of plastic. Products marked with these
symbols can be used as energy waste.
NOTE! Gel batteries are considered problem waste and must therefore be disposed of at a
problem waste facility.
7.1.1 Gas springs
Gas springs can be disposed of as metal waste after all nitrogen gas and oil has been removed from them.
WARNING! Releasing nitrogen gas is strictly prohibited, without following the proper instructions.
Gas spring dismantling instructions are available from your sales representative.
7.1.2 Hydraulics
Hydraulic cylinders can be disposed of as metal waste after all oil has been removed from them.
This symbol is affixed next to the type plate
if the product contains an electric or electronic device.
If so, the product must be recycled separately and cannot be disposed of along with
general waste.
7. RECYCLING