Page 15
IP CAMERA USER MUANUAL
5.2.4
Video Mask
You can set 4 mask area at most.
Fig 5-6 Video Mask
Enable the mask, select color and transparent of the mask area and then drag the mouse
to set the mask area. This will take you see a gridding area. After that, click “Save”
button to save the settings. Then you will see a mask area on the live image.
5.3
Alarm Configuration
Alarm configuration includes three submenus: Motion Detection Area, Motion
Detection Trigger and Motion Detection Schedule.
5.3.1
Motion Detection Area
1.
Enter into “Alarm configuration"
"Motion Detection Area" to see a interface shown
as Fig 5-7:
2. Move the "Sensitivity" scroll bar to setup the motion trace sensitivity.
3. Check "Add”, press the "Ctrl" button and move mouse to select the motion detection
area; Select “Erase” and move the mouse to clear all motion detection area.
4. Press the "Save" button to save the settings.
www.merivasecurity.com
