Merits Silverado Extreme S940A Series, Руководство по обслуживанию

Страница: 16 / 22

13
◆
How to replace the front wheel assembly?
◇
Please proceeding steps as follows if it has to replace.
1. Use the clamp to remove the screw covers (2.53) .
2. Use the hex. tools to loosen the nuts from the arm spindle assembly.
Then remove the front wheel assembly (2.5).
2.4.5. To replace the front tire [see Illus. 14]
1. Release the air from valve of inner tire (2.55) .
2. Use the wrench to loosen three screws (2.58) and nuts (2.59) .
3. Disassemble the outer rear rime (2.52) , inner rear rime (2.51) .
4. Take the tire (2.54, 2.55) out and replace new one.
2.4.6. To replace the controller [see Illus. 07]
◆
When you should replace the controller?
◇
If your scooter can
’
t drive the transaxle assembly.
◇
If the indicator light show error signal sustained.
◇
If the operator has mistake.
◆
How to replace the controller?
◇
Please proceeding steps as follows if it has to replace.
1. Disconnect the power-harness from controller (1.15) .
2. Disconnect the harness of the transaxle assembly from controller.
3. Use the screwdriver to loosen three screws
and nuts from mounting
plate and install new controller.
S347
Illus. 14