COPYRIGHT © 2003 MERIT INDUSTRIES, INC.
PM0358-03 MEGA TOUCH FORCE RADION COIN BOX RETROFIT
3
•
Replace the bill acceptor in the new
coin box and secure it with a rivet and
screw.
31. Remove the (2) screws fastening the
metrimate connector (see Figure 7) to
the coin box and remove the connec-
tor and harness. Be sure to note the
orientation of the connector before re-
moving it.
32. Replace the metrimate connector and
harness in the new coin box and se-
cure it with the (2) screws.
33. Reconnect the power and signal har-
ness to the bill acceptor.
34. Remove the lock assembly from the
existing coin box (be sure to note the
orientation). The lock assembly is held
in place with a screw and a 7/8” nut.
35. Replace the lock assembly in the new
coin box.
36. Insert the supplied flat handle in the new
coin box.
37. Install the new coin box in the game.
38. Plug in and turn on the game.
39. Test the bill acceptor and verify that it
is registering credits correctly.
40. Verify that the speaker is functioning
properly.
41. Replace the side door.
