Meridian Seed Express 1050, Руководство оператора

Страница: 28 / 76

28
5.4 WIRELESS REMOTE
TRANSMITTER
The wireless remote control system is a
state-of-the-art microprocessor based Radio
Frequency (RF) control system. It provides the
operator the ability to operate the seed tender from
the control panel or from the wireless handheld
remote transmitter.
Each radio remote transmitter is designed to
operate on one of fi ve RF channels. The receiver
will respond only to a remote transmitter on the
correct channel. If multiple systems are to work in
close proximity to one another, ensure they are on
different channels to operate without interference.
The channel number is displayed on the remote
transmitter startup screen. In the event that a
remote transmitter becomes damaged and a new
one is needed, the new remote transmitter must
be on the same channel.
All of the normal functions of the seed tender can
be controlled by the remote transmitter.
NOTICE
If the signal from the remote transmitter is lost
during operation for any reason, all functions will
automatically shut down. To restore function, turn
the remote transmitter off and then back on. Restart
the gasoline engine.
5.4.1 Functions of Keypad Buttons
Use the buttons on the keypad to operate the
desired functions of the seed tender.
Off/On/Start (1)
Rotate switch to the On position (1) to turn remote
transmitter ON. Rotate it to the Off position to turn
it OFF.
To save battery life, the remote transmitter will
automatically turn off when it is idle (no functions
are used) for a period greater than the sleep time.
If the transmitter times out, it will need to be turned
off and then back on again to restart.
EMERGENCY STOP (2)
Pressing this button will cause all functions to stop
and shut off the engine.
To reset the Emergency Stop, fi rst eliminate the
condition that caused the operator to use the
Emergency Stop. Rotate the red button either
clockwise or counterclockwise until it pops back
up. The unit will not start while the button is
pressed in. Then rotate switch (1) to the OFF
position, and back ON.
ENGINE START (3)
To start the engine, simultaneously press the
Engine Start button and rotate the switch to the
START position. Press the Engine Stop button to
turn OFF engine.