EN
Media Core 200
User Guide
EN
Back panel
The following diagram gives details of the back panel connections:
Outputs
Use this output
To connect to this
Analogue Out
The line-level inputs of an analogue
preamplifier, the input of a power
amplifier, or active loudspeakers, using
stereo phono leads.
SpeakerLink Out
Digital loudspeakers, such as DSP3200,
or a Meridian system controller with a
SpeakerLink input, using a SpeakerLink
lead.
Digital Out
A digital preamplifier or surround
controller, using an S/PDIF lead.
Other connections
Use this input
To connect to this
Network
A Meridian Sooloos network.
Expansion USB
For connecting a compatible WiFi
receiver, for a wireless network
connection, or a Microsoft Media Centre
compatible IR receiver, for remote control
of the Media Core 200 using an MSR+.
Operating the Media Core 200
To switch on the Media Core 200:
Briefly press the Power On/Off switch on the back panel.
The front panel indicator will flash while the unit is starting up,
and will then remain illuminated when it is ready for use.
To switch off the Media Core 200:
Briefly press the Power On/Off switch on the back panel.
The front panel indicator will flash while the unit is shutting down.
Do not disconnect power until the indicator is completely off.
•
•
Network
Expansion
Meridian
Media Core 200
Designed and made by
Meridian Audio Ltd
England; PE29 6YE
Registered Design ® and
Copyright © 2010
Meridian Audio Ltd.
All rights reserved.
Made in England
Digital Out
L
R
SpeakerLink
Analogue Out
Power Input
12Vdc
36W Max
Use Meridian
G00000 Power
supply
Analogue
phono outputs
Digital
coax output
SpeakerLink
output
Power input
Sooloos
network
Expansion
Power on/off
Содержание Media Core 200
Страница 1: ...Media Core 200 User Guide...
