Page
6
of
14
Step 2
(Tube & Flighting Assembly)
Place the 1
st
& 2
nd
tubes on assembly stands. Place stands 12” or less from the end of the tube. Placing stands
further than 12” from end of the tube may cause damage to the tubes.
Step 3
Slide the flighting together from the 1
st
& 2
nd
tube. Connect the flighting using (2) 1/2" x 2” hex bolts and top
lock nuts. Align flighting as shown to make continuous. After connecting the flighting, slide the 1
st
& 2
nd
tube
together putting in the (8) 3/8" x 1” flange bolts & nuts.
Fig. 2.1
Fig. 3.1
