background image

1. Introduction

!

Congratulations on your choice of a Harvest 

by Meridian

 auger! This 

equipment has been designed and manufactured to meet the needs of 
the discerning buyer.

!

Safe and e

ffi

cient operation of your auger requires that you, and anyone 

else who will be operating or maintaining the auger, read and understand 
the safety, operation, maintenance, and troubleshooting information in 
this manual.

!

Keep this manual handy for frequent reference and to pass on to new 

operators or owners. Call your Harvest 

by Meridian

 distributor or dealer if 

you need assistance, information, or additional copies of the manual.

 

!

Always give your dealer the serial number of your Harvest 

by Meridian

 

Grain Auger when ordering parts or requesting service or information.

The serial number on your auger is located where indicated by the arrow 

in the picture above. Please mark the number in the space provided below 

for easy reference.

 

Model Number:_____________________________________

!

Serial Number:______________________________________

!

Production Year:_____________________________________

!

5

Содержание HARVEST T Series



































Отзывы: