background image

 

 

6.0 Troubleshooting 

 

Below is a listing of several problems that may arise during the installation & operation of the modules.  If 
you are having difficulty installing or operating the modules please refer to this list below.   

 

Problem

:  

Module does not fit in chassis slots 

Action: 

Check module orientation.  Meridian “Globe” must be oriented on the top left hand side 
of the module 

 

 

Make sure the card guides in the chassis are aligned with the extrusion on the module 

Problem

Card power LED does not light when power to the module/subrack is applied or power 
indicator turns on and off 

Action

Check power supply to ensure that it is plugged in and turned on.  If flashing continues, 
move module to another chassis or location in the same chassis, if available. 

Problem

No video at output of module

 

Action

Check to ensure that the video channel-specific LEDs are on (Green).  Also, check to 
ensure that the optical LEDs are ON.  If no video is still present, check to ensure that the 
monitor is ON and the video cable is connected to the correct video port on the Rx 
module. 

Problem

Video image is dark

 

Action

Check the iris control on the camera to ensure that it is open to the proper amount for the 
conditions 

Problem

Video image is too bright and appears overexposed 

Action

Check the Video overload indicator on the Rx module.  If it is Red, the video signal level 
is too high and the CCTV iris should be checked to ensure that it is open properly for the 
conditions. 

Problem:

 

No Data

 

Action:

 

Check the data input status indicator light #1 on the transmit module to ensure it is on 
(indicating a data input signal).  Also check the data output status indicator light #2 on 
the corresponding receiver module to ensure that the signal is being transmitted and 
received.  If not, please check the data input/output and fiber connections.   

 

If the problem still persists after reviewing the above items, please contact Meridian technical 
support (516-285-1000).

 

 

700 Elmont Rd, Elmont, NY 11003, Tel: 516-285-1000; Fax: 516-285-6300 

www.Meridian-tech.com

 

Page 6 

Отзывы: