5
Unpacking
The installation of the DSW600 often involves construction and decoration work. As this type of work can generate dust
and debris, it can make sense to separate components which are not required until later in the process and, either put
them to one side, or move them away from site completely. This enables them to be kept safe and clean for use later.
The electronics module can be installed after the bulk of the construction work has been completed and the grille (if
being used), along with its retaining magnets and its frame, is fitted towards the end of the process.
Contents
Contents
Contents
Contents of the box
of the box
of the box
of the box
Components
Components
Components
Components
•
Acoustic enclosure
•
Upper mounting wings – 2 pieces
•
Lower mounting wings – 2 pieces
•
Installation shield
•
Electronics module
•
Grille frame
•
Grille
Power
Power
Power
Power
•
Mains lead
•
Spare mains fuse
Tools
Tools
Tools
Tools
•
Grab handle for module removal
•
Grille removal tool – 2 pieces
Fittings
Fittings
Fittings
Fittings
•
M5 x 12mm pozidriv countersunk screws silver, with threadlocker applied– 12 pieces
•
M5 x 35mm socket-cap screws silver
•
M5 x50mm anti-vibration fixings black – 10 pieces
•
M5 x 15mm socket-cap screws black – 16 pieces
•
M5 washer (form C) – 16 pieces
•
Grille-retaining magnets (in rubber sleeves) – 14 pieces
