14
Step
Step
Step
Step 13.
13.
13.
13.
Insert the electronics module into the wall
aperture and secure it in place using six of the M5 x 15
socket-cap screws and six of the M5 washers supplied
into the fixing holes indicated here. The ten remaining
M5 x 15 socket cap screws and M5 washers will be
required if the grille frame is not being fitted, so keep
them to one side for now.
Step 14.
Step 14.
Step 14.
Step 14.
If the grille frame is to be fitted:
Fasten it to the subwoofer assembly using the ten M5
x 50 anti-vibration fixings; there are six fixing holes on
the acoustic enclosure and four on the electronics
module. Tighten the fixings firmly enough to clamp
the frame to the wall. Avoid overtightening as any
distortion of the grille frame will impede the fit of the
grille.
If the grille-frame is not being fitted:
It is essential that the fixing holes are blocked to avoid
the possibility of air leaks. This is done by inserting the
ten remaining M5 x 15 socket-cap screws and M5
washers into the ten holes in the front of the
subwoofer assembly;
there are six holes on the
acoustic enclosure and four on the electronics
module.
