Meridian DSP8000 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 96

Meridian DSP8000 Скачать руководство пользователя страница 66

Introduction

Specifications

Connections

Meridian SpeakerLink (RJ4) input and output,
providing balanced digital audio, Meridian Comms,
and serial interface.
Digital co-axial input and output.
Meridian BNC Comms input and output.

Digital formats

44.1–9kHz. FIFO locks at 44.1, 48, 88., or
9kHz ±10ppm.
PCM using SPDIF/IEC098, or MHR connection
support with auto-detection.

Output stages

Power amplifiers: Complementary bipolar design, with
output-stage error correction and twin loop design.
Bass: x 10W.
Mid: 10W.
Treble: 10W.
Total: 70W.

The DSP8000 includes drive unit thermal protection.

Acoustic



way.

Closed bass enclosure.
Separate mid/top plywood cabinet.
Bass drive unit: x 00mm (8") high-efficiency long-
throw custom drivers.
Mid drive unit: 1 x 10mm (") custom driver.
Treble drive unit: 1 x mm (1") Boothroyd Stuart
piston in short horn, composite dome with silver
voice-coil.

•

•
•

•

•

•

•
•
•
•

•
•
•
•

•
•

Characteristics

Distortion typically <0.01%, or <0.0% up to full
power at all frequencies.
Noise and hum <-94dBr at all volume settings.
Acoustic output typically >11dB spl @ 1m.
Acoustic noise <1dB spl @ 1m.
Frequency response in room response within dB,
Hz-kHz.

Cabinet

Entire speaker manufactured from interlaminated
panels.
Glass front.
Finished in high-gloss piano lacquer.
400mm x 100mm x 8mm (1.7" x 1." x
0.8") W x H x D excluding feet.
10kg (1lb) each.

Power

100-1; 00-0V AC 0-0Hz.
0VA standby; 90VA max.

Meridian Audio reserves the right to amend product
specifications at any time.

Available accessories

Other applications, and some advanced features, may
require one or more of the following accessories, which
can be purchased from your Meridian dealer:

MSR+ remote.
Interconnecting leads.
AC11 SpeakerLink Hub, to allow interconnection
between newer products with SpeakerLink
connectors, and products with Meridian BNC Comms
or Meridian DIN Comms connectors.
AC1 SpeakerLink accessory, to allow
interconnection to older Meridian source or controller
products.

•

•
•
•
•

•

•
•
•

•

•
•

•
•
•

•

«
...
64
65
66
67
68
...
»

Содержание DSP8000

































































































Отзывы:

Нет отзывов