Meridian D6000, Руководство пользователя

Страница: 22 / 59

Using D6000 22
D6000 User Guide
Loudness indication
To check whether loudness is on, use the menu keys to review the
setting, or inspect the source display, e.g.
cd. 67.
The point after the number indicates loudness on.
Storing settings
In Setup mode you can store settings for:
•
tilt – overall frequency balance
•
bass
•
phase
•
loudness
•
axis
An unusual feature of D6000 is that the tone control settings for tilt and
bass can be stored separately for each source. If, for example, you
happen to prefer a tilt setting only when listening to the video source, use
Setup to programme the D6000 for that setting. You can then recall the
setting by pressing Store while listening to the video source in Normal
mode.
At any time, you can use the Clear key to restore the following factory
settings :
•
bass to 0.0
•
tilt to 0.0
•
balance to middle
•
Loudness to normal
You cannot store settings in Normal mode. See page 36.
Recalling settings
The settings stored in the D6000 can be recalled at any time. When the
display is normal (i.e. not a tone cursor):
1. Press Store
The D6000 will respond with
rEc.
Tip You can now compare the stored settings with the standard ones.
Use the Clear key to restore a flat response, then Store to recall the
stored settings.
Note When you change sources, you will need to press Store to recall
any favourite tone setting you may have stored.
Note Clear does not reset the phase and axis settings.