Meridian C61R, Руководство по установке

Страница: 88 / 116

C o n t r o l
W i n d o w
Emulating an MSR+ or MSR
To send a command to the product
• Click the corresponding button on the Control Window.
The bar above the buttons shows the response from the product,
corresponding to the front panel display.
To enter a function key
Either:
• Click the
Fn
button followed by the button you want to enter.
Or:
• Right-click the button or click the button while holding down
c
.
The legends of the buttons change to show the function options.
To lock the Fn button down
• Click the
Lock
button:
Subsequent button presses will then enter function keys.
Press the Lock button or Fn button again to release the Lock
button.
To see the command corresponding to each button
Each button transmits a two-letter code to the product.
• Point to the button with the mouse pointer.
A tooltip shows the description of the key followed by the key’s
command:
You can also give commands by typing the key’s command on the
computer keyboard.
Note: Commands are case sensitive.
For example, to select the CD source type CD .
In addition, the following keys on the keyboard provide shortcuts
for the menu buttons:
Computer key MSR button
^
,
V
,
<
,
>
A , V , < , >
R
Enter
b
(backspace) Return
To disconnect the Control Window
• Click the Disconnect button.
To connect the Control Window
• Select the COM port you want to use from the
Port
drop-down
list.
• Click the
Connect
button.
A warning triangle next to a port number indicates that it is in use
by another application.
To close the Control Window
• Click the Close button or press
E
.