Meridian C61R, Руководство по установке

Страница: 28 / 116

C o n f i g u r i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r
Stage 3: Configuring sources
The digital surround controller provides up to 12 sources
corresponding to the 12 source keys on the MSR+:
CD, RADIO, DVD, AUX, DISC, TAPE, TV, CABLE, SAT, VCR1, VCR2,
GAME.
For each source the Configure sources stage allows you to
configure a series of options, including:
• Whether it is in use.
• The label used for it on the front-panel display.
• The audio input it selects.
• The TRIGGER output level it selects.
The procedure for doing this is as follows.
To configure a source
Either:
• Press
Next
after configuring speakers; see page 20.
Or:
• Press Wizard ; see page 17.
• Press Skip to skip past the Reset settings and Select
speakers menus.
The display shows the title screen for stage 3:
3KIP "ACK
0RESS-OREFORHELP
%NTER
#ONFIGURESOURCES
• Press
Enter
to proceed or
Skip
to go to stage 4.
The display shows the first source and the first configuration option
for that source, whether it is in use:
z{| wxy "ACK .EXT
4HISSOURCEIS
3OURCE
#$ INUSE
• Press Next or Back to step between options.
The top line of the display shows a description of each option, and
its current value is shown to the right of the source name.
When changing the source name, Next and Back step between
character positions.
The options are summarised in the table on the next page.
To change an option
• Press A or V to step through the alternative values for the
option.
To move to the next source
• Press Source .
When you have finished configuring sources:
Either:
• Press
Next
on the last option of the last source (Game) to
proceed to configuring settings, as described in the next section.
Or:
• Press On/Off to return to standby.