Meridian 808 Signature Reference, Руководство пользователя

Страница: 45 / 52

41
Configuring the 808
Signature Reference
CD Player
Setup parameters
To enter front panel setup mode
Put the 808 into standby by pressing Off (front panel
or remote).
Press and hold down ¯ (under the front panel).
The display shows: Setup in... 3
Keep holding down ¯ for a further three seconds.
When the countdown finishes the display will show the
first of the setup menus.
•
•
•
For example:
IR Auto
To use the setup menus
Press ¯ or ˘ (under the front panel) until the
display shows the parameter you want to change.
For example:
Output Fixed
Press or Volume – (under the front
panel) to change the parameter.
The following table gives a list of all the Setup
parameters:
•
•
Parameter Range Default Notes
IR Auto, Controller,
Not Controller Auto See To connect to other G Series or 800 Series equipment, page 38.
Startup Volume LV or 25 to 87 Last Valid See To set the startup volume, page 42.
Output Fixed, Variable See To set the output mode, page 43.
SpeakerLink Off, On On See
To set the SpeakerLink mode, page 43.
EBA Menu * Show, Hide Show Enables the EBA menu; see
Primary SpeakerLink controls, page 24.
Position Menu * Show, Hide Hide Enables the position menu; see Primary SpeakerLink controls, page 24.
EBC Menus * Show, Hide Hide Enables the EBC menus; see Primary SpeakerLink controls, page 24.
Measurement * Inches, Metric Inches See
To set the measurement units, page 44.
Room Height * 58-158 inches,
150-400cm 58inches
(150cm) See
To specify the room height, page 44.
Subwoofer
Menus * Show, Hide Hide Enables the subwoofer menus; see
Subwoofer setup controls, page 25.
Loudness
Menu * Show, Hide Hide Enables the Loudness menu; see Primary SpeakerLink controls, page
24.
Relay Mute Normal, Silent Normal See To set the relay mute mode, page 45.
Input Gain Menu Show, Hide Hide Enables the input gain menu; see Adjusting the sensitivity of sources,
page 20.
Diagnostics Show, Hide Hide To help diagnose technical issues.
* These options are only available if
Output
is
Fixed
and
SpeakerLink
is
On
.