Meridian 808 Signature Reference, Руководство пользователя

Страница: 28 / 52

24
Using the
SpeakerLink controls
Primary SpeakerLink controls
The EBA (Enhanced Bass Alignment) control improves
the bass alignment in DSP loudspeakers that support
it. Note that the extra processing adds a time delay, so
it should be disabled for video sources.
The Position control adjusts the sound to compensate
for the placement of the main loudspeakers, such as
near a wall or corner.
The EBC (Enhanced Boundary Compensation) control
adjusts the sound to compensate for the height of the
ceiling.
The
Loudness
control alters the frequency response
to make music sound more natural when played at a
low volume setting.
Each of these controls is only available if the
corresponding option
EBA Menu
,
Position Menu
,
EBC Menus , or Loudness Menu is set to Show in
the setup menus; see Setup parameters , page 41.
To specify Enhanced Bass Alignment
Press < or > (remote) until the display shows the
current EBA setting.
For example:
SLS EBA On
Press A or V (remote) to choose between
On
or
Off .
To specify the main speaker position
Press < or > (remote) until the display shows the
current location setting.
For example:
SLS Position Corn.
Press A or V (remote) to choose between
Corn.
(corner),
Shelf
,
Wall
, or
Free
(free standing).
•
•
•
To specify Enhanced Boundary Control
Press < or > (remote) until the display shows the
current EBC setting.
For example:
SLS EBC Max
Press A or V (remote) to specify how reflective
the room surfaces are. Choose between Off
(unreflective),
Min
,
Med
, or
Max
(highly reflective).
To change the loudness
Press < or > (remote) until the display shows the
current loudness setting.
Press A or V (remote) to turn the loudness control
on or off.
For example:
SLS Loudness On
•
•
•
•