Merida BIG.NINE E-LITE 600, Руководство пользователя

Страница: 32 / 129

32
a
b
c
d
As soon as the axle thread engages with the thread of
the right fork leg, close the axle by turning it clockwise
(a)
. During the first rotations you should be able to rotate
the thru axle nearly without resistance. Tighten the axle
a little.
Close the E-Thru quick-release lever like a usual
quick-release lever
(b)
.
At the beginning you should feel virtually no resistance
and clamping effect. When the lever is at right angle the
resistance you feel should increase significantly and to-
wards the end you should need even more strength to
close the lever.
If the lever cannot be closed completely, re-open it and
turn the axle a little counterclockwise. Try again to close
the quick-release lever
(c)
.
Use the palm of your hand to push it in all the way while
your fingers pull on the fork leg, but not on a spoke or
the rotor.
In its end position the quick-release lever should be
tight so that it can no longer be turned. Make sure the
quick-release lever does not stand out to the front or to
the side. The best closing position is in nearly upright
position in front of the lower leg
(d)
.
Dismounting wheels
If your bike is equipped with a Fox E-Thru 15 mm th-
ru-axle system, open the quick-release lever complete-
ly. Open the thru axle by turning counterclockwise.
Once you have screwed out completely the thru-axle
thread from the thread of the lower leg, you can remove
the thru axle completely.
i
More information are provided at
www.ridefox.com
SR SUNTOUR Q-LOC2 15QL C2 (e.g. SR SUNTOUR
Auron LO-RC)
Mounting wheels
If your bike is equipped with an SR SUNTOUR Q-LOC-
system 15 mm, put the front wheel into the fork and
mount the rotor in the brake caliper, if necessary. Bring the
front wheel into the right position between the drop-outs.
Open the quick-release lever of the SR SUNTOUR thru
axle completely. Turn the counter nut on the thru axle
counterclockwise until the expander releases.
Slide the axle with open quick-release lever and re-
leased expander from the right side through the drop-
out and the hub until the thru axle engages with a clear
“click”. Now turn the quick-release lever forcefully
clockwise until the axle is hand-tight.
Finish by closing the quick-release lever like a usual
quick-release lever. Make sure the quick-release lever
does not stand out to the front or to the side.