MW305R
300Mbps Wireless N Router User Guide
Add -
Click to add a new rule entry.
Delete All -
Click to delete all the entries in the table.
Delete Selected -
Click to delete selected entries in the table.
To add a new rule, follow the steps below.
1.
Toggle on to enable Access Control.
2.
Select Whitelist or Blacklist.
3.
Click Add and enter a brief description for the rule.
4.
Click
Configure
in the
Hosts Under Control
column to add a host, then click
Apply
.
Host Description -
In this field, create a unique description for the host.
Mode
- Here are two options,
IP Address
and
MAC Address
. You can select either of
them from the drop-down list.
If the
IP Address
is selected, you can see the following item:
IP Address Range
- Enter the IP address or address range of the host in
dotted-decimal format (e.g. 192.168.1.23).
If the MAC Address is selected, you can see the following item:
MAC Address
- Enter the MAC address of the host in XX-XX-XX-XX-XX-XX format (e.g.
00-11-22-33-44-AA).
- 33 -
