Mercury Zeus 3000 Series, Руководство пользователя

Страница: 59 / 160

Section 3 - On the Water
90-866938081 MAY 2009 Page 51
NOTE: If the ERC levers at the helms are not in neutral, the neutral lights will flash. Move
all the ERC levers to neutral and the neutral light should then be on.
2. With the "TRANSFER" button light and neutral light on, press the "TRANSFER" button
a second time to complete the helm transfer.
3. When the helm transfer is complete, another beep sounds and the transfer button light
turns off.
NOTE: If the helm transfer is not completed in ten seconds the request is automatically
cancelled and a double beep sounds. Control will remain at the existing active helm. Press
the "TRANSFER" button again to restart helm transfer.
4. The helm where the transfer request was initiated is now active and controls the
vessel.
Helm Transfer and Precision Pilot
Transferring control from an active helm to an inactive helm (from one station to another
station) affects the functionality of Precision Pilot modes. Some of the affects are listed.
• Auto Heading mode is disengaged when the ERC levers are moved to neutral for helm
transfer. You must re‑engage Auto Heading at the newly active helm.
• Requesting a helm transfer causes Pilot to go to Standby mode. You will need to input
information at the new helm in control.
• If engaged, Skyhook will disengage when the "TRANSFER" button is pressed the
second time. You must engage Skyhook at the the newly active helm.
• The Resume feature for Auto Heading does not transfer automatically. After engaging
the previous Auto Heading course at the newly active helm, the resume feature works
the same as at any active station.
• In Track Waypoint mode the control of the route and display of route data on your chart
plotter does not automatically transfer to the chart plotter at the requested helm. You
must turn on the chart plotter at the newly active helm, input the waypoint or waypoint
route to be tracked, and re‑engage Track Waypoint.
Precision Pilot
Precision Pilot Trackpad Features
GENERAL INFORMATION
Precision Pilot trackpad features includes:
• Precision Pilot (or Pilot) functions are controlled through the Pilot trackpad only.
• Pilot screens are located under the Environment chapter of VesselView.
• The "TURN" buttons provide a 10° course correction for each press to the port or
starboard.
• The "AUTO HEADING", "TRACK WAYPOINT", and "WAYPOINT SEQUENCE"
buttons engage automatic course and heading modes.
• The steering wheel feels locked into a detent when Auto Heading or Track Waypoint
are engaged. Manually overcoming the detent force of the steering wheel automatically
puts Pilot into Standby mode.
STANDBY
The elements of the Standby screen are:
• In standby mode, the display shows a digital compass value and the angle of the
drives.
• The compass value is the actual current heading from Pilot.