VESSELVIEW 903
90-8M0129930 eng MAY 2017
© 2017 Mercury Marine
Page 3 / 5
NOTE: The following diagram is an example only. Use the template that came with the kit.
231.0 mm (9.09 in.)
163.5 mm (6.43 in.)
129.5 mm (5.09 in.)
206.0 mm (8.11 in.)
232.0 mm (9.13 in.)
154.5 mm (6.08 in.)
63066
8M0129931
MARCH 2017
Suncover Outline
Suncover Outline
Product Outline
Product Outline
63128
90.0 mm (3.54 in.)
Remove Shaded Area
5. Remove the template and insert the VesselView into the panel to ensure fit. Do not secure it to the instrument panel at
this time.
Securing VesselView to the Instrument Panel
a -
Instrument panel
b -
Sealing gasket
c -
VesselView
d -
Mounting screw alignment tool*
e -
Mounting screws*
f -
Bezel
NOTE: *Four mounting screws and one mounting screw
alignment tool are available in parts bag P/N
8M6003966.
1. Install the sealing gasket onto the back side of the VesselView.
2. Insert the VesselView with sealing gasket into the opening in the instrument panel.
3. Secure the VesselView with the four provided mounting screws, using a #1 Phillips head screwdriver.
IMPORTANT: Use the supplied alignment tool to align the screws and to protect the glass surface from damage during
installation.
b
c
d
e
63061
f
a
