manualshive.com logo in svg

Mercury Vessel View 4, Руководство пользователя

Поделиться
Скачать
Mercury Vessel View 4 Скачать руководство пользователя страница 55

Section 4 - Setup and Calibrations

90-8M0120668   

eng

  MARCH  2016

Page  51

Steering

Steering source data can be selected to come from either the PCM or the TVM, with options to display the data on‑screen, to

invert steering input, and to establish a steering offset degree.
The Invert steering option is helpful when there is a VesselView which is rear‑facing. In this case the steering data will match

the operator's point of view.
Steering Offset is used to align the outboard, sterndrive or inboard to 0°. When the drive is positioned perpendicular to the hull,

the steering angle may not match the steering sensor on the drive. To adjust this variance, select the Offset tab. The Steering

Angle Calibration box appears. Selecting the Calibrated row Zero button will apply the offset. Note that the offset does not

change on the display indicator until the SAVE button is selected.

Sea Temp

Depending on the type of water temperature sender the vessel has, the operator can select the source of the data. PCM

options are for vessels equipped with a SmartCraft sensor. The Airmar® options are for vessels equipped with the sensor

hooked up to the 4‑pin diagnostic connection on the engine. The chart shows the position of the engine that is being used to

transmit temperature data to the VesselView.

SmartCraft sensor

Airmar sensor

PCM0

Starboard outer engine

Airmar0

Starboard outer engine

PCM1

Port outer engine

Airmar1

Port outer engine

PCM2

Starboard inner engine or center

Airmar2

Starboard inner engine

PCM3

Port inner engine

Airmar3

Port inner engine

Depth Offset

Depth Offset is the distance from the tranducer to the actual waterline. The offset default setting is 0.0 ft. To set an offset below

the transducer, subtract from the depth offset. To set an offset above the transducer, add to the depth offset.

a -

Depth transducer

b -

To set an offset below the

transducer, subtract from the depth

offset

c -

No offset. Distance from depth

transducer to bottom.

d -

To set an offset above the

transducer, add to the depth offset

Engines

56815

32883

b

c

d

a

Содержание Vessel View 4






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды