manualshive.com logo in svg

Mercury V-6 series, Руководство пользователя

Поделиться
Скачать
Mercury V-6 series Скачать руководство пользователя страница 73

 71

CA54

Checking Fluid Levels

CHECKING CRANKCASE OIL

Stop engine. Allow approximately five minutes for oil to drain into oil
pan. Boat must be at rest in water.

1

Remove dipstick. Wipe clean and reinstall fully into dipstick tube.

2

Remove dipstick and observe oil level. Oil level must be between

FULL and ADD. If oil level is below ADD:

3

Remove oil filler cap. Add specified oil to bring level up to, but not

over, FULL mark on dipstick.

IMPORTANT: Do not overfill crankcase oil.

CA55

CHECKING POWER STEERING PUMP FLUID

Stop engine and position drive unit straight back.

4

Remove FILLCAP/DIPSTICK and observe level. Add specified

fluid if required. Reinstall FILLCAP/DIPSTICK.

IMPORTANT: If fluid is not visible in pump, contact your
Authorized MerCruiser Dealer.

CA477

CHECKING ENGINE COOLANT - CLOSED COOLED
MODELS ONLY

WARNING

Avoid serious injury from burns. Do not remove coolant cap
when engine is hot. Coolant may discharge violently.

5

Check coolant level in coolant recovery bottle. Add specified

coolant as required.

6

Periodically remove cap from coolant reservoir to ensure that

coolant recovery system is functioning properly. Coolant level must
be at top of reservoir filler neck. If coolant is low, inspect gasket in cap
for damage and replace if necessary. To have cap tested, contact
your Authorized MerCruiser Dealer. Inspect coolant recovery system
for leaks.

Содержание V-6 series
































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды