manualshive.com logo in svg

Mercury V-6 series, Руководство пользователя

Поделиться
Скачать
Mercury V-6 series Скачать руководство пользователя страница 7

 5

CA755

Read This Manual Thoroughly

IF YOU DON’T UNDERSTAND ANY PORTION, CONTACT YOUR
DEALER FOR A DEMONSTRATION OF ACTUAL STARTING
AND OPERATING PROCEDURES.

NOTICE
Throughout this publication, and on your power package,
WARNINGS and CAUTIONS, accompanied by the International
Hazard Symbol 

!

, may be used to alert the installer/user to special

instructions concerning a particular service or operation that may be
hazardous if performed incorrectly or carelessly. Observe them
carefully.

These “Safety Alerts” alone cannot eliminate the hazards that they
signal. Strict compliance with these special instructions while
performing the service, plus “common sense” operation, are major
accident prevention measures.

WARNING

WARNING-Hazards or unsafe practices which could result in
severe personal injury or death.

CAUTION

CAUTION-Hazards or unsafe practices which could result in
minor personal injury or product or property damage.

IMPORTANT: - Indicates information or instructions that are
necessary for proper operation and/or maintenance.

WARNING

The operator (driver) is responsible for the correct and safe
operation of the boat, the equipment aboard and the safety of
all occupants aboard. We strongly recommend that the opera-
tor read this Operation, Maintenance and Warranty Manual
and thoroughly understand the operational instructions for
the power package and all related accessories before the boat
is used.

Содержание V-6 series
































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды