(11) Hercules Heavy-Duty Floor Machine
Hercules Heavy-Duty Floor Machine (8)
4.0 Operating Tips
For indoor use only. Sweep abrasive soils before scrubbing
While the brush or pad driver is spinning, keep the floor
machine moving to avoid “donut” burns on the floor.
4.1 Starting your Floor Machine
• Unlock the handle by raising the locking lever.
• Lower the handle to a comfortable position, typically
waist high.
• Re-lock the handle by pushing the lever down. DO NOT
OPERATE THE MACHINE WITH THE HANDLE
UNLOCKED.
• This floor machine has a high torque motor. Hold the
machine firmly with both hands when starting up.
• Use your index finger to lift the safety interlock lever up.
• Squeeze the dual triggers to release power to the motor.
Once power is on, either trigger will keep power to the
motor.
• To stop the floor machine release both triggers.
• The spinning brush helps move the floor machine. Lift
the handle slightly to work to the right. Push the handle
down slightly to work to the left.
4.2 Storing your Floor Machine
• Lock the handle in the “up” position. Tilt the machine
back and remove the pad driver or brush.
• Wind the cord around the handles and the bottom cord
hook.
• Wash brushes or pads and hang to dry. Never store
machine standing on the brush.
• Check and clean pads after each operation. Remove soil
and chemical buildup. Replace worn or damaged pads.
• Check the triggers and switches for proper operation.
• Repair or replace damaged skirts and dumpers.
• Use air pressure or vacuum to remove dust and debris
from the motor vents.
• Inspect and maintain equipment on a regular schedule for
best results.
• See an authorized service center for repairs.
CONTINUED on Page 12
7.0 Machine Parts List
Drawing No.
Item No.
Description
Quantity
37
B-8
Acorn Nut for Yoke Pin
2.00
38
B-5
Rubber Spacer
2.00
39
B-7
Yoke Pin
1.00
40
A-1001
Yoke
1.00
41
B-30
Spring
2.00
42
B-29
1/2” Flat Washer
2.00
43
M-245
6” Wheel
2.00
44
B-51
Spring Washer
4.00
45
V0038
Hub Cap
2.00
46
A-166
Main Machine Frame
1.00
47
B-95
Base Casting Screw
3.00
48A
M-232-13/Y
Bumper 13” - Yellow
1.00
48B
M-232-15/Y
Bumper 15” - Yellow
1.00
48C
M-232-17/Y
Bumper 17” - Yellow
1.00
48D
M-232-19/Y
Bumper 19” - Yellow
1.00
48E
M-232-21/Y
Bumper 21” - Yellow
1.00
49A
A-163
Apron 13”
1.00
49B
A-167
Apron 15”
1.00
49C
A-169
Apron 17”
1.00
49D
A-171
Apron 19”
1.00
49E
A-172
Apron 21”
1.00
50
B-50
Apron Plug
1.00
51
B-31
Cap Screw
4.00
52
MOTOR 1.5 HP/GB
66 Frame Motor, 1.5 HP with Gearbox,
115V
1.00
53
M-240
Axel
1.00
54
M-248
Cork Drip Cap Cover
1.00
55
M-239-Y
66 Frame Drip Cap Bumper Cover - Yellow
1.00
56
M-242-1A-Y
66 Frame Drip Cap Cover - Yellow
1.00
57
B-151
Drip Cap Mounting Screw
3.00
58
G-14-50-Y
50-Foot, 14/3-Gauge Power Cable - Yellow
1.00
