Chapter 4 - WPS Configuration
11N Wireless USB Adapter 29
Chapter 4.
WPS configuration
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
If the wireless card supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless card and router using either Push Button Configuration (PBC)
method or PIN method.
Insert the Resource CD into your CD-ROM drive, choose
Network Adapter
and open the folder
named
MW150U
. Then double-click
WPS_Setup.exe
, you will see the following page.
Figure 4-1
Then, please follow the clue of the Operation System to complete the WPS installation. After that,
WPS function can be enabled. Here we will introduce two ways to configure the WPS (For the
configuration of WPS, here takes the Wireless Router of our company for example).
4.1 PBC (Push Button Configuration) method
1. Firstly, press the WPS button of the router. There are two ways:
1) Press the WPS button directly on the front panel of the Router shown in the following
figure.