Mercury motorguide X5-105 Скачать руководство пользователя страница 7

MotorGuide Limited Two Year Warranty

KEEP YOUR ORIGINAL PURCHASE RECEIPT

1. To obtain warranty service, the purchaser should deliver or return the unit

(postage prepaid and insured) to any MotorGuide authorized service

center. DO NOT RETURN TO PLACE OF PURCHASE unless they are

an authorized service center. Motors purchased in other countries should

be returned to place of purchase. Products returned by mail should be

carefully packaged and include a note describing the nature of the

problem and/or service requested, customer address, and phone number.

A copy of the receipt, Bill of Sale, registration verification, or other proof of

purchase is required with the return of the product for warranty

consideration. Warranty claims will not be accepted without presentation

of purchase receipt for trolling motor, other verification of registration, or

Bill of Sale for boat package.

2. MotorGuide electric trolling motors are warranted to the original purchaser

to be free from defects in material and/or workmanship for two (2) years.

Warranty is NOT transferable to any subsequent purchaser.

3. MotorGuide, at its discretion, will repair or replace items covered under

the terms of this warranty. Neither MotorGuide nor MotorGuide service

dealers are responsible for damages to MotorGuide products due to

repairs performed by anyone other than the MotorGuide Factory Service

Center. Neither MotorGuide nor Mercury Marine is responsible for failure

or damage caused by improper installation, set‑up, preparation, or

previous service or repair errors.

4. Warranty coverage is available only to customers that purchase from a

dealer authorized by MotorGuide/Mercury Marine to distribute the product

in the country in which the sale occurred. Warranty coverage and duration

varies by the country in which the product resides. This warranty applies

to X5 series MotorGuide trolling motors sold and residing in the United

States. This Limited Warranty begins on the date the product is first sold

to a purchaser or the date on which the product is first put into service,

whichever occurs first. MotorGuide accessories are covered by this

Limited Warranty for a coverage period of one (1) year from the date of

retail sale. The repair or replacement of parts, or the performance of

service under this warranty, does not extend the life of this warranty

beyond its original expiration date. Promotional warranties are not

included in this statement and coverage may vary by promotion. Product

either sold or put into service more than six years from date of

manufacture is excluded from warranty coverage.

5. MotorGuide Composite Shaft Limited Lifetime Warranty. MotorGuide

composite shafts are warranted to the original retail purchaser to be free

of defects in material or workmanship for the lifetime of the original

purchaser. MotorGuide will provide a new composite shaft at no cost for

any composite shaft which contains a defect in material or workmanship.

The installation costs are the sole responsibility of the purchaser.

WARRANTY INFORMATION

eng

1

  

Содержание motorguide X5-105










































Отзывы: