Mercury motorguide X5-105, Руководство по эксплуатации, обслуживанию и установке

Страница: 36 / 41

1. Remove the foot pedal from the boat deck if it has been secured with
screws.
2. Adjust the cable tension by turning the cable tension screw clockwise to
increase tension, and counterclockwise to decrease tension. Adjust the
cable tension screw to the specified torque value.
Description Nm lb‑in. lb‑ft
Cable tension screw 1.7 15 –
Bottom of foot pedal
a - Cable tension screw
Front Locking Pin Replacement
The front locking pin can be easily replaced if the locking pin is damaged. Refer
to the following instructions and follow them completely for a successful repair.
!
WARNING
Performing service or maintenance without first disconnecting the battery can
cause product damage, personal injury, or death due to fire, explosion,
electrical shock, or unexpected motor starting. Always disconnect the battery
cables from the battery before maintaining, servicing, installing, or removing
motor components.
1. Pull the latch release handle and open the mount to a position where it is
part way between the stowed and deployed positions. Support the mount
in this position.
2. Pull and hold the latch release handle until the lock is aligned as shown.
Hold the latch release handle in this position.
a
54574
MAINTENANCE
30
eng