Mercury KVM266PM, Руководство пользователя

Страница: 23 / 54

19
Installing the Motherboard
Connecting Optional Devices
Refer to the following for information on connecting the motherboard’s optional devices:
2. Please make sure that the USB cable has the same pin assignment as
indicated above. A different pin assignment may cause damage or system
hang-up.
USB3/USB4: Front Panel USB header
The motherboard has four USB ports installed on the rear edge I/O port array. Additionally,
some computer cases have USB ports at the front of the case. If you have this kind of case,
use auxiliary USB connector to connect the front-mounted ports to the motherboard.
Pin Signal Name Function
1
USBPWR Front Panel USB Power
2
USBPWR Front Panel USB Power
3
USB_FP_P0(-) USB Port 0 Negative Signal
4
USB_FP_P1(-) USB Port 1 Negative Signal
5
USB) USB Port 0 Positive Signal
6
USB) USB Port 1 Positive Signal
7
GND Ground
8
GND Ground
9
Key No pin
10
NC Not connected
1. Please noted that USB2 (I/O connector) and USB4 (header) cannot
use simultaneously.