manualshive.com logo in svg

Mercury KOB 845 NDFSX, Руководство пользователя

Поделиться
Скачать
Mercury KOB 845 NDFSX Скачать руководство пользователя страница 34

 

LAN/Ring PowerOn 

The system can be turned off with a software command. If you enable this 
item, the system can automatically resume if there is an incoming call on the 
Modem. You must use an ATX power supply in order to use this feature. 

Resume On RTC Alarm / Date / Hour / Minute / Second 

The system can be turned off with a software command. If you enable this 
item, the system can automatically resume at a fixed time based on the sys-
tem’s RTC (realtime clock). Use the items below this one to set the date and 
time of the wake-up alarm. You must use an ATX power supply in order to use 
this feature.  

PCI / Plug and Play Setup  

This page sets some of the parameters for devices installed on the PCI bus 
and devices that use the system plug and play capability. 

AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP  

(C) 2000 American Megatrends, Inc. All Rights Reserved 

 

Plug and Play Aware O/S 

Yes 

Primary Graphics Adapter 

PCI 

Allocate IRQ for PCI VGA 

Yes 

 

ESC  :  Quit             

↑↓←→

  :  Select Item 

F1     :  Help             PU/PD/+/-  :  Modify 
F5     :  Old Values   (Shift)F2    :  Color 
F6     :  Load BIOS Defaults 
F7     :  Load Setup Defaults 

Plug and Play Aware O/S 

Enable this item if you are using an O/S that supports Plug and Play such as 
Windows 95/98/ME. 

Primary Graphics Adapter 

This item indicates if the primary graphics adapter uses the PCI or the AGP 
bus.  The default PCI setting still lets the onboard display work and allows the 
use of a second display card installed in a PCI slot. 

Allocate IRQ to PCI VGA 

If this item is enabled, an IRQ will be assigned to the PCI VGA graphics sys-
tem. You set this value to No to free up an IRQ. 

 

30 

Содержание KOB 845 NDFSX











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды