LPT & COM
(LPT/COM)
When this item is enabled, the system will restart the power-
saving timeout counters when any activity is detected on the
serial ports, or the parallel port.
HDD & FDD (On)
When this item is enabled, the system will restart the power-
saving timeout counters when any activity is detected on the
hard disk drive or the floppy diskette drive.
PCI Master (Off)
When set to Off any PCI device with Master function will not
power on the system.
PowerOn by PCI Card (Disabled)
Use this item to enable PCI activity to wakeup the system
from a power saving mode.
Wake Up On LAN/Ring (Disabled)
Use this item to enable LAN or modem activity to wakeup the
system from a power saving mode.
RTC Alarm Resume (Disabled)
When set to Enabled, the following two fields become avail-
able and you can set the date (day of the month), hour, minute
and second to turn on your system. When set to 0 (zero) for
the day of the month, the alarm will power on your system
every day at the specified time.
Primary INTR (On)
Set Primary INTR to ON to allow you to enable or disable IRQ
3 through IRQ 15 activity monitoring. Set it to OFF to disable
IRQ activity monitoring.
58
