AGP Fast Write (Disabled)
This item allows you to enable or disable the caching of dis-
play data for the video memory of the processor. Enabling can
greatly improve the display speed. If your graphics display
card does not support this feature, you need to disable this
item
OnChip USB (Enabled)
This should be enabled if your system has a USB installed on
the system board and you wish to use it.
USB Keyboard Support (Disabled)
Enable this item if you plan to use a keyboard connected
through the USB port in a legacy operating system (such as
DOS) that does not support Plug and Play.
OnChip Sound (Auto)
When set to Disabled, the onboard audio chip is turned off.
CPU to PCI Write Buffer (Enabled)
When enabled, up to four words of data can be written to the
PCI bus without interrupting the CPU. When disabled, a write
buffer is not used and the CPU read cycle will not be com-
pleted until the PCI bus signals that it is ready to receive the
data. The default setting is Enabled.
PCI Dynamic Bursting (Enabled)
When set to Enabled, every write transaction goes to the write
buffer. Burstable transactions then “burst” on the PCI bus and
nonburstable transaction do not.
PCI Master 0 WS Write (Enabled)
When set to Enabled, writes to the PCI bus are executed with
zero wait states.
PCI Delay Transaction (Enabled)
The chipset has an embedded 32-bit posted write buffer to
support delay transactions cycles. Select Enabled to support
compliance with PCI specification version 2.1.
PCI#2 Access #1 Retry (Enabled)
When set to Enabled, the AGP Bus (PCI#2) access to PCI
48
