Mercury Green 320, Руководство по обслуживанию

Страница: 54 / 85

54
Code Description
80h The keyboard test has started. Clearing the output buffer and checking for stuck keys. Issuing the keyboard reset
command next.
81h A keyboard reset error or stuck key was found. Issuing the keyboard controller interface test command next.
82h The keyboard controller interface test completed. Writing the command byte and initializing the circular buffer next.
83h The command byte was written and global data initialization has completed. Checking for a locked key next.
84h Locked key checking is over. Checking for a memory size mismatch with CMOS RAM data next.
85h The memory size check is done. Displaying a soft error and checking for a password or bypassing WINBIOS Setup
next.
86h The password was checked. Performing any required programming before WINBIOS Setup next.
87h The programming before WINBIOS Setup has completed. Uncompressing the WINBIOS Setup code and executing the
AMIBIOS Setup or WINBIOS Setup utility next.
88h Returned from WINBIOS Setup and cleared the screen. Performing any necessary programming after WINBIOS Setup
next.
89h The programming after WINBIOS Setup has completed. Displaying the power on screen message next.
8Bh The first screen message has been displayed. The
<WAIT...>
message is displayed. Performing the PS/2 mouse check
and extended BIOS data area allocation check next.
8Ch Programming the WINBIOS Setup options next.
8Dh The WINBIOS Setup options are programmed. Resetting the hard disk controller next.
8Fh The hard disk controller has been reset. Configuring the floppy drive controller next.
91h The floppy drive controller has been configured. Configuring the hard disk drive controller next.
95h Initializing the bus option ROMs from C800 next.
96h Initializing before passing control to the option ROM at C800.
97h Initialization before the C800 option ROM gains control has completed. The option ROM check is next.
98h The option ROM had control and has now returned control to BIOS POST. Performing any required processing after
the option ROM returned control.
99h Any initialization required after the option ROM test has completed. Configuring the timer data area and printer base
address next.
9Ah Set the timer and printer base addresses. Setting the RS-232 base address next.
9Bh Returned after setting the RS-232 base address. Performing any required initialization before the Coprocessor test
next.
9Ch Required initialization before the Coprocessor test is over. Initializing the Coprocessor next.
9Dh Coprocessor initialized. Performing any required initialization after the Coprocessor test next.
9Eh Initialization after the Coprocessor test is complete. Checking the extended keyboard, keyboard ID, and Num Lock key
next. Issuing the keyboard ID command next.
A2h Displaying any soft errors next.
A3h The soft error display has completed. Setting the keyboard typematic rate next.