OPERATION
30
eng
Install the outboard along the centerline of the boat transom.
Fasten the outboard to the transom following the recommended
installation instructions provided with the outboard or from the
outboard manufacturer.
Verify that the outboard is tightly secured on the transom before
each use.
!
WARNING
Exceeding the boat's maximum horsepower rating can cause
serious injury or death. Overpowering the boat can affect boat
control and flotation characteristics or break the transom. Do
not install an engine that exceeds the boat's maximum power
rating.
Pre‑Operating Check List
• Check the inflation pressure of the air chambers.
• Remove any obstruction from the drain valve.
• Verify that the outboard is tightly secured on the transom.
• Know the fuel capacity and cruising range of the outboard.
• Ensure that the outboard lanyard stop switch works
correctly. Refer to
General Information—Lanyard Stop
Switch.
• Be sure that the boat is not overloaded. Do not exceed the
maximum number of passengers or load capacity. Refer to
the boat capacity plate.
• Be sure that there is a readily accessible approved personal
flotation device of suitable size for each person aboard. It is
the law.
• Check that there are paddles in the boat in case of engine
trouble.
• Be sure that the operator knows safe navigation, boating,
and operating procedures.
• Be sure that there is a ring‑type life buoy or buoyant cushion
designed to be thrown to a person in the water.
