Mercury Cougar 2000 Скачать руководство пользователя страница 116

Страница: 116 / 281

Seating and safety restraints

115

Safety belt extension assembly

The safety belt may be too short

even when fully extended.

Approximately 20 cm (8 inches)

may be added to the length of the

belt with a safety belt extension

(part number 611C22). Safety belt

extensions are available at no cost

fromyour dealer.
Only use extensions manufactured

by the same supplier as the safety

belt. Manufacturer identification is

located on the label at the end of

the webbing.
Do not use the extension to change

the fit of the shoulder belt across

the torso.

Safety belt maintenance

Inspect the safety belt systems

periodically to make sure they work

properly and are not damaged.

Inspect the safety belts to make

sure there are no nicks, wears or

cuts and replace if necessary. All

safety belt assemblies, including

retractors, buckles, front safety

belt buckle assemblies slide bar,

shoulder belt height adjusters, and

attaching hardware, should be

inspected after a collision.

Содержание Cougar 2000


























































































































































































































































































Результаты поиска

Содержание Cougar 2000

Отзывы:

Похожие инструкции для Cougar 2000

Бренды по названию

Популярные бренды

Mercury Cougar 2000, Руководство пользователя

Результаты поиска

Содержание Cougar 2000

Отзывы:

Похожие инструкции для Cougar 2000

Бренды по названию

Популярные бренды