Mercury 92-8M0069603 Скачать руководство пользователя | Manualshive

Страница: 42 / 85

background image

Section 4 - Maintenance

Page 34

90-8M0113986

eng

DECEMBER 2015

13. Locate the crankcase oil drain hose and remove the cap.

53365

14. Install the crankcase oil pump (order separately) onto the crankcase oil drain hose.

Crankcase Oil Pump

91‑ 802889Q 1

11591

Aids in the removal of engine oil without draining the crankcase.

15. Pump the oil out of the crankcase into an appropriate container.
16. Remove the crankcase oil pump and install the cap onto the crankcase oil drain hose and tighten securely.
17. Install the oil dipstick.
18. Remove the oil fill cap and fill the engine with oil. Refer to

Filling

.

IMPORTANT: When filling the engine with oil, always use the dipstick to determine how much oil is required.

19. Replace and secure the oil fill cap.
20. Start the engine and check for leaks.
21. Dispose of the waste oil, filter, and O‑ring as directed by local ordinances.

TM 345 Technodrive Transmission Fluid

Checking

1. Remove the dipstick.
2. Perform a preliminary check the oil level as indicated on the dipstick with the dipstick fully inserted into the dipstick

receptacle.

NOTE: The oil level may be somewhat over the maximum mark, as some of the oil from the transmission oil cooler and

hoses may have drained back into the transmission.

«
...
40
41
42
43
44
...
»

Содержание 92-8M0069603






















































































Отзывы:

Нет отзывов

Похожие инструкции для 92-8M0069603

Бренд: VEM Страницы: 27

Бренд: Garmin Страницы: 14

Бренд: Navistar Страницы: 197

Бренд: Stihl Страницы: 40

Бренд: FAAC Страницы: 7

Бренд: Suzuki Страницы: 91

Бренд: O.S. engine Страницы: 15

Бренд: Man Страницы: 18

Бренд: Yamaha Страницы: 30

3T-MOTORS 3T35-R

Бренд: 3T-Components Страницы: 20

Бренд: LCT Страницы: 25

Бренд: Wilesco Страницы: 4

TWINMOT T2-PLUS H

Бренд: Germany Motions Страницы: 12

Бренд: DLE Страницы: 4

Бренд: DLE Страницы: 4

Бренд: O.S. Speed Страницы: 4

Бренд: Teknik Страницы: 121

Бренд: Tecno Automazione Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды