Mercury 92-813054A2, Руководство пользователя

Страница: 79 / 97

Section 5 - Maintenance
90-8M0069748
eng
APRIL 2012 Page 71
Shift Cable
1. Lubricate the pivot points and guide contact surfaces.
Typical inboard model shift cable and transmission linkage
a - Pivot points
b - Guide contact surface
Tube Ref No. Description Where Used Part No.
80
SAE Engine Oil 30W Shift cable pivot points and guide contact surfaces Obtain Locally
Serpentine Belt Inspection
!
WARNING
Inspecting the belts with the engine running may cause serious injury or death. Turn off the engine and remove the ignition
key before adjusting tension or inspecting belts.
All drive belts must be periodically inspected for proper tension and condition. Belts that show signs of wear such as cracking,
fraying, or glazing of the belt surface should be replaced.
If the serpentine belt needs to be replaced, consult your Mercury Diesel authorized repair facility.
1. Inspect the belt for proper tension and for the following:
• Excessive wear
• Cracks
NOTE: Minor, transverse cracks (across the belt width) may be acceptable. Cracking that results in the loss of belt
material or longitudinal cracks (in the direction of belt length) that join transverse cracks are not acceptable.
• Fraying
• Glazed surfaces
21062
2. Check the operation of the automatic tensioner and associated components.
a. Position a suitable tool on the automatic tensioner pulley bolt.
b
a
13347