Mercury 8/9.9 BigFoot Скачать руководство пользователя страница 23

Страница: 23 / 153

WARRANTY INFORMATION

eng

For additional information regarding events and circumstances

covered by this warranty, and those that are not, see the

Warranty Coverage section of the Operation and Maintenance

Manual, incorporated by reference into this warranty.

DISCLAIMERS AND LIMITATIONS:
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE

EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED

WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE

EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES

ARE EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. SOME

STATES/COUNTRIES DO NOT ALLOW FOR THE DISCLAIMERS,

LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A RESULT,

THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU

SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL

RIGHTS WHICH VARY FROM STATE TO STATE AND COUNTRY TO

COUNTRY.

FourStroke Outboard Limited Warranty

MIDDLE-EAST AND AFRICA

WHAT IS COVERED:

Mercury Marine warrants its new

Outboard and Jet Products to be free of defects in material and

workmanship during the period described below.

Содержание 8/9.9 BigFoot


























































































































































Результаты поиска

Содержание 8/9.9 BigFoot

Отзывы:

Mercury 8/9.9 BigFoot, Руководство пользователя, Страница: 23 / 153

Результаты поиска

Содержание 8/9.9 BigFoot

Отзывы: