Mercury 8/9.9 BigFoot Скачать руководство пользователя страница 102

Страница: 102 / 153

OPERATION

eng

4. Remove the three screws holding the flywheel cover on.

a -

Flywheel cover screws (3)

b -

Recoil neutral interlock

c -

Fuse holder

5. Remove the flywheel cover.
6. Remote Control models ‑ Ensure the key switch is in the

"ON" position.

WARNING

High voltage is present any time the key is turned on,

especially when starting or operating the engine. Do not

touch ignition components or metal test probes and stay clear

of spark plug leads when performing live tests.

WARNING

The exposed moving flywheel can cause serious injury. Keep

your hands, hair, clothing, tools, and other objects away from

engine when starting or running the engine. Do not attempt to

reinstall the flywheel cover or top cowl when engine is

running.

7. Refer to the appropriate starting procedure (cold or hot).

28614

Содержание 8/9.9 BigFoot


























































































































































Результаты поиска

Содержание 8/9.9 BigFoot

Отзывы:

Mercury 8/9.9 BigFoot, Руководство пользователя, Страница: 102 / 153

Результаты поиска

Содержание 8/9.9 BigFoot

Отзывы: