Mercury 8.2 H.O. ECT, Руководство пользователя, Страница: 59 / 94

Section 5 - Maintenance
90-8M0061999
eng
MAY 2012 Page 51
Date Maintenance Performed Engine Hours
Engine Oil
Checking
NOTICE
Discharge of oil, coolant, or other engine/drive fluids into the environment is restricted by law. Use caution not to spill oil,
coolant, or other fluids into the environment when using or servicing your boat. Be aware of the local restrictions governing
the disposal or recycling of waste, and contain and dispose of fluids as required.
1. Stop the engine. Allow the oil to drain into the oil pan for approximately five minutes with the boat at rest in the water.
2. Remove the dipstick, wipe clean, and install fully into the dipstick tube. Wait 60 seconds to allow trapped air to vent.
a - Oil dipstick handle
b - Operating range
.
3. Inspect the dipstick reading, which should indicate a level at the operating range (cross markings) on the dipstick. Reinstall
the dipstick into the dipstick tube. If the oil level is low, refer to
Filling.
Filling
IMPORTANT: Always use the dipstick to determine the exact quantity of oil or fluid required. Do not overfill the engine with oil.
b
a
43692
a