manualshive.com logo in svg

Mercury 300XS OptiMax, Руководство пользователя

Поделиться
Скачать
Mercury 300XS OptiMax Скачать руководство пользователя страница 100

STORAGE

  

94

eng

1. Remove the spark plugs and add approximately 30 ml (1 oz) of engine oil

into each spark plug hole.

2. Rotate the flywheel manually several times to distribute the oil in the

cylinders.

3. Install the spark plugs.

Protecting External Outboard Components

•

Lubricate all outboard components listed in 

Maintenance 

‑

 Inspection

and Maintenance Schedule

.

•

Touch up any paint nicks. See your dealer for touch‑up paint.

•

Spray Quicksilver or Mercury Precision Lubricants Corrosion Guard on

external metal surfaces (except corrosion control anodes).

Tube Ref

No.

Description

Where Used

Part No.

120

Corrosion Guard

External metal surfaces

92-802878 55

Gearcase

•

Drain and refill the gearcase lubricant (refer to

 Gearcase Lubrication

).

Positioning Outboard for Storage

Store outboard in an upright (vertical) position to allow water to drain out of the

outboard.

NOTICE

Storing  the  outboard  in  a  tilted  position  can  damage  the  outboard.  Water

trapped  in  the  cooling  passages  or  rain  water  collected  in  the  propeller

exhaust outlet in the gearcase can freeze. Store the outboard in the full down

position.

Battery Storage

•

Follow the battery manufacturer's instructions for storage and charging.

•

Remove the battery from the boat and check water level. Charge if

necessary.

•

Store the battery in a cool, dry place.

•

Periodically check the water level and charge the battery during storage.

Содержание 300XS OptiMax


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды